STEP
1
MOUNT
LEVEL
Using a level, adjust mounting hardware to ensure both light curtains are straight.
ALIGNMENT AID
If using a deTec with the integrated laser alignment aid, turn the laser on and rotate the sender until the laser hits the bottom row of blue alignment LEDs of the receiver.
ROTATE
Rotate the receiver until the top and bottom rows of Blue LEDs each have four LEDs illuminated. The field LEDs will turn green.
ON & OFF
Turn off the alignment lasers and run your machine!
Using a tape measure, mount the sender and receiver at the same height from the reference plane.
Alignment in 5 Steps
SAFETY LIGHT CURTAIN
STEP
2
STEP
3
STEP
4
STEP
5
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME
LOADING AWESOME